Direct Flow 400 GPD RO System
Direct Flow 400 GPD RO System is designed to produce 400 gallons of purified water per day without the need...
Discover the 72 GPM Ultraviolet Water Filtration System in Dubai, UAE. Contact FilterPro for UV water treatment solutions.
Explore FilterPro water treatment solutions including water softeners, filtration systems, water purifiers, UV systems, commercial RO and industrial RO systems for homes, offices, commercial properties and industries in Dubai and across the UAE.
Direct Flow 400 GPD RO System is designed to produce 400 gallons of purified water per day without the need...
Water Softener, Media Filter with UV for effective hard water treatment, filtration, and UV disinfection. Ideal for homes, villas, commercial
Commercial Water Softener in UAE | High-performance commercial water softener systems designed to reduce hard water, scale buildup
The 72 GPM Ultraviolet Water Filtration System is intended for high-flow water treatment applications requiring ultraviolet (UV) technology for microbiological control. Water passes through a dedicated UV reactor chamber, where UV-C energy helps inactivate susceptible microorganisms when the equipment is correctly selected, installed, and operated according to its validated performance specifications.
With a nominal flow rate of 72 gallons per minute (GPM), equivalent to approximately 272.5 litres per minute (LPM), this category of UV equipment may be considered for large buildings, commercial facilities, and selected industrial or institutional water treatment installations. The actual treatment capacity depends on the model, required UV dose, incoming water quality, and the manufacturer's validated flow rating. Confirm these details before selecting a system.
A UV water treatment system uses ultraviolet light to help inactivate susceptible microorganisms as water flows through a specially designed reactor chamber. The UV lamp is commonly enclosed in a protective quartz sleeve, allowing ultraviolet energy to reach the water while keeping the lamp separated from direct water contact.
High-capacity UV systems can be incorporated into compatible point-of-entry, building-level, or commercial treatment arrangements. Suitable upstream filtration and good water clarity are important because suspended particles, colour, and low UV transmittance can reduce the effectiveness of UV treatment.
Uses ultraviolet energy to help inactivate susceptible microorganisms when the required UV dose is delivered under the system's specified operating conditions.
Corresponds to approximately 272.5 litres per minute. Confirm the validated operating flow at the required UV dose and intended water quality before choosing the unit.
May be integrated into a compatible building or commercial treatment line after checking hydraulic requirements, pipe connections, installation space, and electrical specifications.
Water enters the UV reactor chamber and passes through a treatment zone illuminated by a UV lamp. Ultraviolet energy helps inactivate susceptible microorganisms as water moves through the chamber. The treated water then exits the reactor for distribution or for an additional treatment stage, where required by the overall system design.
UV treatment effectiveness depends on the delivered UV dose, flow rate, water clarity, UV transmittance, lamp condition, and cleanliness of the quartz sleeve. Higher flow rates can reduce exposure time, so selection should be based on validated flow-versus-dose information rather than nominal capacity alone. Suitable pre-filtration may be necessary to reduce particles that can shield microorganisms from UV exposure.
| Stage | Function |
|---|---|
| 1. Pre-Filtration | Suitable upstream filtration helps reduce suspended particles and improve conditions for ultraviolet transmission. |
| 2. UV Reactor Chamber | Water passes through a chamber designed to expose it to ultraviolet light. |
| 3. Microbial Inactivation | UV energy helps inactivate susceptible microorganisms when the required dose is delivered under rated operating conditions. |
| 4. Treated Water Outlet | Water leaves the reactor for distribution or a compatible downstream treatment process. |
May be considered for building-level water treatment where the validated UV capacity matches the site's peak flow demand and water quality.
Can be evaluated for compatible commercial premises requiring higher-flow water treatment as part of a properly designed treatment system.
May be incorporated into suitable industrial or institutional installations following application-specific engineering and performance checks.
| Component | Purpose |
|---|---|
| UV Reactor Chamber | Provides the controlled passage through which water is exposed to ultraviolet energy. |
| UV Lamp Assembly | Produces the ultraviolet energy used during the treatment process. |
| Quartz Sleeve | Separates the lamp from the water while allowing UV light to pass into the treatment chamber. |
| Electronic Ballast or Controller | Provides the electrical operation required by the lamp; additional functions depend on the selected model. |
| UV Sensor or Monitoring System | Where fitted, monitors UV intensity or equipment status to help identify conditions that may affect treatment performance. |
| Inlet and Outlet Connections | Connect the UV reactor to compatible plumbing and associated water treatment equipment. |
| Seals and Mounting Hardware | Support secure installation and leak-resistant connections when included with the selected system. |
The following table provides general selection information for a 72 GPM UV water treatment system. Actual construction details, electrical requirements, and treatment performance vary by manufacturer and model. Confirm the product datasheet and validated performance information before purchase or installation.
| Product Type | Ultraviolet Water Filtration / Treatment System |
|---|---|
| Nominal Flow Rate | 72 GPM (approximately 272.5 LPM); confirm validated flow at the required UV dose |
| Treatment Technology | Ultraviolet light (UV-C) |
| Installation Type | Point-of-entry, inline, or another compatible installation depending on the model |
| Reactor Material | Model-specific; verify the chamber material in the manufacturer's technical datasheet |
| Lamp Power and Configuration | Model-specific; confirm lamp wattage, number of lamps, and replacement requirements |
| Electrical Requirements | Model-specific; verify voltage, frequency, current, and total power consumption |
| Inlet / Outlet Connections | Model-specific; check connection size and thread type before installation |
| UV Dose Rating | Refer to the manufacturer's validated performance data for the intended flow rate and water quality |
| Monitoring and Alarms | Model-specific; selected units may include UV sensors, intensity displays, or alarm functions |
| Lamp Service Life | As specified by the manufacturer; follow the recommended replacement interval |
| Operating Pressure | Model-specific; confirm the maximum allowable operating pressure |
| Water Quality Requirements | Suitable water clarity and UV transmittance; appropriate pre-treatment may be required |
In Dubai and across the UAE, a 72 GPM ultraviolet water treatment system may be considered for large buildings, commercial facilities, and selected industrial or institutional applications. The appropriate configuration depends on peak water demand, incoming water quality, required UV performance, installation space, and applicable local requirements.
UV treatment is primarily intended for microbiological control. It does not, by itself, remove dissolved salts, hardness, metals, sediment, or most chemical contaminants. Additional filtration or treatment may be needed based on water testing. UV treatment alone does not guarantee safe drinking water; the complete treatment system must suit the source water and be correctly operated and maintained according to the manufacturer's instructions.
Get assistance assessing whether a 72 GPM UV system matches your flow requirements and intended water treatment application.
Review integration with existing filtration equipment, plumbing connections, and any required pre-treatment stages.
Identify routine service requirements, replacement components, and monitoring options for the selected UV system.
Contact FilterPro to discuss your water quality, peak flow requirements, installation conditions, and suitable UV treatment options for your building, facility, or business in Dubai, UAE.
Contact FilterPro